Skip to main content

Exit Load in Mutual Funds: How It Works and How to Avoid It

An exit load is a fee for redeeming mutual fund units early. See typical equity and liquid fund loads, the FIFO calculation, and how it hits switches and SWPs.

Beginner8 min readUpdated
By Kousigan A · Learn. Share. Grow together.

An exit load is a fee, worked out as a percentage of NAV, that a mutual fund deducts when you redeem units before a set period. Many equity funds charge 1% within a year, and some charge less. Liquid funds follow an industry-wide graded load, from 0.0070% on day one to nil from day seven.

Important Disclaimer

This guide is for education only. The exit loads quoted are from the scheme documents and SEBI papers listed under Sources, as checked in October 2026. Fund houses change loads for new investments, so read your own scheme's current documents before you redeem.

Awin set up his SWP expecting ₹8,750 to land in his bank account each month. The first credit came in a little short. Not by much, but Awin had spent years watching FD interest to the rupee, and he noticed.

The gap was an exit load. His units were less than a year old, so every SWP instalment counted as an early redemption. Here's how that works, and how he could have avoided it.

What is an exit load, and who keeps it?

Exit load:
An exit load is a charge a mutual fund deducts from your redemption proceeds when you redeem or switch out units before a period set in the scheme's documents, calculated as a percentage of the NAV of the units redeemed.

SEBI's FAQ for mutual fund investors says the purpose is to discourage short-term trading and protect the investors who stay. Entry loads, the old charge on the way in, are no longer allowed.

So where does the money go? Not to the fund house's profit. SEBI's master circular says the exit load, net of the GST on it, is credited back to the scheme, a rule that dates from a September 2012 circular. In effect, the investors who leave early pay something to the ones who stay.

Two more rules protect you. SEBI's investor FAQ says a fund can't increase its exit load beyond the level in its offer document, and to add or raise a load it has to amend that document. And the master circular says any new or higher load applies only to investments made after the change, so units you already hold keep the load they were bought under. HDFC Mutual Fund's fund facts add a detail for SIPs: the exit load that applies is the one in force on the date you registered the SIP.

What do typical exit loads look like?

There's no single rule for most categories. Each scheme sets its own load in its scheme information document (SID). Here's what a few looked like when I checked in October 2026:

Exit loads of selected schemes, from their own documents, as checked in October 2026
SchemeCategoryExit load
Any liquid fundLiquidGraded: 0.0070% on day 1, falling to nil from day 7
HDFC Flexi Cap FundFlexi cap1% if redeemed within 1 year of allotment; nil after
Parag Parikh Flexi Cap FundFlexi cap10% of units free; 2% within 365 days, 1% from 366 to 730 days; nil after
Quantum Ethical FundThematic10% of units free; 1% on the rest within 365 days; nil after

The liquid fund row is the only one that applies industry-wide. In October 2019, SEBI agreed to a graded exit load structure that AMFI proposed for all liquid funds, so that money parked for a few days pays a little and money parked for a week pays nothing. SEBI's master circular of 20 March 2026 still requires it for any exit within 7 calendar days:

Graded exit load for liquid funds agreed by SEBI in October 2019, as a percentage of redemption proceeds
You redeem onExit load
Day 10.0070%
Day 20.0065%
Day 30.0060%
Day 40.0055%
Day 50.0050%
Day 60.0045%
Day 7 onwardsNil

Notice the "10% of units free" clause in two of the equity funds. That allowance changes the answer for SWPs, which comes up below.

How is exit load calculated?

SEBI's FAQ gives the formula: exit load rate × number of units redeemed × NAV. The amount comes out of your redemption proceeds.

Two more rules decide which units the load applies to:

  • Every purchase has its own clock. Scheme documents apply the load "in respect of each purchase", so each SIP instalment starts its own one-year count from its allotment date.
  • Units go out first in, first out. Quantum's exit load note says redemptions and switch-outs are done on a FIFO basis. Your oldest units are sold first.
FIFO in action on a 1% one-year load

You bought 1,000 units on 10 January 2025 and another 1,000 on 10 December 2025. On 1 October 2026 you redeem 1,500 units at a NAV of ₹62.40.

FIFO sells the January 2025 units first. All 1,000 are more than a year old, so no load.

The next 500 come from December 2025. They're 295 days old, so the 1% applies: 500 × ₹62.40 × 1% = ₹312.

Gross value: 1,500 × ₹62.40 = ₹93,600. You receive ₹93,288.

Awin's liquid fund, redeemed on day 4

Awin parks ₹5,00,000 in a liquid fund and needs it all back on day 4.

Exit load: ₹5,00,000 × 0.0055% = ₹27.50.

Wait three more days and it's nil. For a liquid fund, the graded load is a nudge, not a penalty. The liquid fund vs savings account guide covers how much cash to keep in the bank for the first week.

Does exit load apply to switches and SWPs?

Yes to both, with one exception.

Switching to another scheme counts as a redemption from the first one. HDFC's fund facts say the exit load applies if units are switched out of the scheme within the load period.

Switching between plans or options of the same scheme doesn't. HDFC, PPFAS and Quantum all say no load is charged for switching between plans or options within the scheme. For plans, it's now a SEBI rule: the master circular bars exit load on a switch from a regular plan to the direct plan, or back, under the same scheme. The tax still applies, as the guide to switching from regular to direct works through.

SWP instalments are redemptions too. Quantum's note says its load structure applies equally to SWPs, STPs and switches. Each SWP instalment sells your oldest units first, and if they're inside the load period, the load comes off.

Awin's SWP in its first year

Awin put ₹20,00,000 into a fund and started an SWP of ₹8,750 a month straight away. To keep it simple, say the scheme charges 1% on units redeemed within 12 months of allotment, with no free allowance.

Every instalment in year one sells units under 12 months old.

Load per instalment: ₹8,750 × 1% = ₹87.50, so ₹8,662.50 lands in his account.

Load over 12 instalments: ₹87.50 × 12 = ₹1,050.

Now take a scheme with a 10% free allowance instead. 10% of his units is worth about ₹2,00,000 at the start, while a year of SWP withdraws 12 × ₹8,750 = ₹1,05,000. The whole first year fits inside the allowance, so the load is likely nil. "Likely" because the allowance counts units, and the rupee value of those units moves with the NAV.

So how could Awin have avoided the ₹1,050? Two ways. He could fund year one's withdrawals from his liquid fund, where the load disappears after a week, and start the SWP after 12 months. Or he could pick a scheme whose free allowance covers his withdrawals. The SWP guide covers how to size the withdrawal itself.

Units you get from bonus issues or IDCW reinvestment are exempt too. SEBI's master circular says no exit load is charged on them, and HDFC's fund facts repeat it.

Where do you find a fund's exit load?

Three places, in order of authority:

  1. The SID and the Key Information Memorandum (KIM). These are the legal documents. Look for the "Load structure" section.
  2. The monthly factsheet or fund facts. Most fund houses print the load next to the plans and options. The factsheet guide shows where.
  3. Addenda. When a fund house changes its load, it publishes a notice-cum-addendum. The new load applies to investments made after the effective date.

Apps show exit loads too, but they're copying the SID. Before a large redemption, check the source.

When is it worth paying an exit load?

Sometimes the load is the cheaper option. Why stay in a fund you've lost faith in, just to save 1%?

Compare it with the alternatives. A 1% load on ₹1,00,000 is ₹1,000. If you need the money for an emergency, that's far cheaper than a personal loan. If you're leaving a poorly run fund for a much better one, a year of underperformance can cost more than the load.

But don't pay it by accident. If your redemption date is a few weeks from the end of the load period, waiting usually costs nothing. And remember the load is separate from tax. Selling equity units held 12 months or less also brings 20% short-term capital gains tax, which the mutual fund taxation guide explains.

Sources

Key Takeaways

  • An exit load is a percentage of NAV deducted when you redeem or switch out units inside the period set in the scheme's documents
  • Liquid funds follow SEBI's graded load, 0.0070% on day one to nil from day seven; many equity funds charge 1% within a year, but check your scheme's SID
  • Each purchase or SIP instalment has its own clock, and units are redeemed first in, first out
  • SWPs and switches to other schemes attract the load; switches between plans or options of the same scheme don't
  • A free allowance, such as 10% of units, can cover a modest SWP in its first year
  • Check the SID, KIM or factsheet before you redeem, and remember tax is charged separately
Quick Quiz

A fund charges 1% on units redeemed within a year. You redeem 2,000 units at a NAV of ₹50, and all of them are 8 months old. How much exit load do you pay?

Frequently asked questions

What is exit load in mutual funds?

An exit load is a charge deducted from your redemption proceeds when you redeem or switch out units before a period set in the scheme's documents. SEBI says its purpose is to discourage short-term trading. The load, net of GST, is credited back to the scheme. SEBI says a fund cannot increase the exit load beyond the level in its offer document, and any new or higher load applies only to investments made after the change, not to units you already hold.

How is exit load calculated?

SEBI's investor FAQ gives the formula: exit load rate multiplied by units redeemed multiplied by NAV. For example, 1% on 2,000 units at a NAV of ₹50 is ₹1,000. Each purchase or SIP instalment has its own load period from its allotment date, and units are redeemed first in, first out, so your oldest units go first.

What is the exit load on liquid funds?

All liquid funds follow a graded exit load on exits within 7 days, which SEBI agreed with AMFI in October 2019 and still requires under its Master Circular of 20 March 2026, charged as a percentage of redemption proceeds: 0.0070% on day 1, 0.0065% on day 2, 0.0060% on day 3, 0.0055% on day 4, 0.0050% on day 5, 0.0045% on day 6, and nil from day 7.

Is exit load charged on SWP?

Usually yes, because each SWP instalment is a redemption. Quantum Mutual Fund's load note, for example, says its exit load applies equally to SWPs, STPs and switches. Instalments sell your oldest units first, so a SWP started soon after investing can attract the load in year one, unless the scheme's free allowance, such as 10% of units, covers the withdrawals.

Is exit load charged when switching between plans of the same fund?

No. Scheme documents from HDFC, PPFAS and Quantum say no exit load is charged on switches between plans or options of the same scheme, and SEBI's Master Circular of 20 March 2026 bars it on a switch from regular to direct plan, or back, under the same scheme. A switch into a different scheme counts as a redemption and attracts the first scheme's exit load.

Try Our Free Tools

Put what you’ve learned into action with our calculators and courses.

Continue Learning

This guide is part of our Mutual Funds course. Start with the related chapter:

Types of Mutual Funds

Related guides